Series 3 C-type integrated welding gun

The tail of the Series 3 integrated suspension spot welding gun is designed with lightweight structure, with stable air cylinder pressure output. The body is small and light. The transformer is of power frequency type and is applied to stations with complex operating posture and high turnover frequency of welding gun. Due to the small size of the welding gun, the welding pressure and power are limited and are generally used for thin plate welding.

The integrated suspension spot welding gun is made by the assembling process, where the transformer and the gun arm are integrated and fixed on the rotating disc. The inner ring and the outer ring of the rotating disc are connected by a steel ball structure, which has the characteristics of flexible rotation and no clamping stagnation. The welding gun can rotate by 360 degrees through the rotating disc, and the rotating disc is provided with a locking mechanism which can be locked at any angle, thus effectively meeting some specific welding postures. After the welding is completed with specific postures, the welding gun can rotate normally once unlocked.

The body of welding gun is made with hard die casting process, and has compact structure, high density, high strength and few defects such as sand holes and air holes.

Solenoid valves and other outsourced parts are well-known foreign brands with stable performance and long service life.

The cable at the tail of the welding gun is fixed by a wire harness frame, which can effectively prevent the cable from friction damage when the welding gun twist.

Anhui Riji Welding Equipment Co., Ltd.

Address:No.27, 2nd Ring Road, Chengbei Industrial Park, Huizhou District, Huangshan City

Technical support:+86 19955900208


Copyright declaration ContactUs
Copyright©2019 Anhui Riji Welding Equipment Co., Ltd. .All Rights Reserved Wan ICP 19022461Designed by Wanhu